
Length | 40ft - 53ft |
Width | 96" - 102" |
5th Wheel Height | 49" |
King PIN | Double Spool set @ 36" from front |
Landing Gear | 2-speed with 10"x10" sand shoes, heavy duty steel bracing in 2 directions for support and stability |
Suspension | Hutch H-9000T inside I-beam slider with Hutch H-9700T side mount hanger with 3-leaf springs |
Axles | 5" OD x 5/8" wall, 25,000lbs capacity |
Brakes | 16-1/2" x 7" with Wabco 2S/1M ABS brakes. Wabco ABS wired to center pin of seven way socket. |
Wheels | 22.5 x 8.25 Hub - Piloted steel disc wheels pre-painted white. |
Tire | 11R22.5 14ply Generals |
Flooring | 1-1/8" Apitong, finger jointed full length, ship-lapped. Flooring secured with two 5/16" screws per crossmembers. |
Electrical | USA sealed harness with 7-way plug. Truck-Lite lights. 2 front marker lights, 3 markers per side, 2 stop, turn & tail lights per side on rear, 3 markers lights at center on rear skirt and one 4" mid-turn light each side of trailer. |
Main Frame | 24" deep fabricated automatic machine welded I-Beam with built in positive camber. 7/16" x 5" 130ksi top and bottom flanges with 3/16" belly web. The main rail is punched to fit the contour of a 4" Jr.I-beam one piece floor sill. |
Side Rail | 6" deep structural steel channel @ 6.5# with pockets 1-11/16" x 3-1/4" ID spaced on 24" centers with 1-1/4" pipe spools between each pocket and 3/8" x 2" skid rail. |
Crossmembers | 4" high tensil steel I-beam on 18" centers (12"optional) |
Paint | Completely sand blasted, cleaned then primed with 2 coats of primer and 2 coats of Urethane paint. |
Mud Flaps | CLARK anti-spray, anti-sail mounted on rear of trailer |
Frame Capacity | 80,000lbs distributed frame rating. GAWR Tire rating determines legal load |