Oil Field Float

Clark Trailer, INC.

Oil Field Float

Model COFF-HD-09


Length

38ft - 48ft

Width

96" - 102"

5th Wheel Height

50"

King PIN

Double spool set @ 24" from front

Landing Gear

Telescoping folding landing gear with winch

Suspension

Hutch H-900-50 Single point

Axles

5" OD x 5/8" wall, 25,000lbs capacity

Brakes

16-1/2" x 7" with Wabco 2S/1M ABS brakes. Wabco ABS wired to center pin of seven way socket.

Wheels

22.5 x 8.25 Hub - Piloted steel disc wheels pre-painted white.

Tire

11R24.5 14ply Generals

Flooring

1-3/8" Apitong, finger jointed full length, ship-lapped. Flooring secured with two 5/16" screws per crossmembers.

Electrical

USA sealed harness with 7-way plug. Truck-Lite lights. 2 front marker lights, 3 markers per side, 2 stop, turn & tail lights per side on rear, 3 markers lights at center on rear skirt and one 4" mid-turn light each side of trailer.

Main Frame

24" deep fabricated automatic machine welded I-Beam with built in positive camber. 3/4" x 6 top and bottom flanges with 1/4" belly web. The main rail is punched to fit the contour of a 6" Jr.I-beam one piece floor sill.

Side Rail

8’’ deep structural steel channel @ 8.5# with pockets 1-11/16’’ x 3-1/4’’ ID spaced on 24’’ centers with 1-1/4’’ pipe spools between each pocket and 3/8’’ x 3’’ skid rail

Crossmembers

6" high tensil steel I-beam on 12" centers

Reinforcement

1/4’’x 3’’ flat bar welded to bottom of side rail on both side of trailer.

Front

Square front with half round pipe and pick up eye.

Rear

Rear skirt with 8-5/8’’ rolling tail pipe with self-aligning bearing supported by two extra heavy duty support rollers.

Paint

Completely sand blasted, cleaned then primed with 2 coats of primer and 2 coats of Urethane paint.

Mud Flaps

CLARK anti-spray, anti-sail mounted on rear of trailer

Frame Capacity

100,000lbs distributed frame rating. GAWR Tire rating determines legal load.